What drainage stone should I use for wet ground, a French drain or a culvert outlet?

Use Drain Rock for an open drainage layer. It is also known as washed rock or 3/4 clean. Place it where water needs a clear route, and keep soil from mixing into the stone with suitable separation fabric where site conditions require it.

What should be ready when the dump truck arrives in Sitka City and Borough?

Mark the exact pile location and remove vehicles, tools and other obstacles from the approach. Check for overhead clearance and enough room for the truck to turn and raise its bed. The dump area needs stable ground, because the delivery is placed as one pile.

Should I order tons or cubic yards of D-1 Base Course?

Use the calculator on the D-1 Base Course product page to enter length, width and planned depth. Tons measure weight, while cubic yards measure volume. Measure the finished area carefully, then allow for compaction when planning a base layer.

Sitka City and Borough D-1 Base Course Delivery, AK

Alaska Rock Supply provides bulk material delivery across the City and Borough of Sitka, including Sitka. D-1 Base Course is the working aggregate for road surfaces, building pads and repairs that need a compacted base. Across Alaska, where a site has muskeg, use geotextile and a thicker gravel lift to limit settling; spring breakup also calls for a firm surfaced drive rather than exposed ground.

Bulk delivery in Sitka City and Borough

Order online by the ton or the yard, use the calculator on each product page, and select a delivery date at checkout. Material arrives as one pile from a dump truck. We deliver in Sitka, including ZIP code 99835. Check that the truck has a clear approach, adequate turning room, overhead clearance, and a designated dump spot that is firm enough for the truck.

Materials for Sitka City and Borough projects

Use it below driveway surfaces, cabin pads, shop pads and gravel roads. Pit Run is useful where a project needs bulk fill before the finished base layer goes down.

For a driveway repair, start with D-1 Base Course over a prepared area and compact it in lifts. A pad for a cabin or shop needs a level, compacted base with enough depth for the load and ground conditions. Pit Run works for building up low areas before placing a finished D-1 layer.

Drain Rock belongs in drainage trenches, around outlet areas and wherever water needs an open stone path. Screened Sand works for bedding and leveling below selected finished work. Natural Pea Gravel and river rock are finish materials for walks, beds and driveway surfaces, while roads and camp roads need D-1 Base Course rather than finish stone.

Ground conditions in Sitka City and Borough

Before ordering, measure the work area, mark the dump location and check where water collects after rain or during breakup. Across Alaska, a site with muskeg needs separation fabric beneath a thicker gravel section so the aggregate does not press down into weak ground. Plan drainage before placing the base, since water trapped under a driveway or pad shortens the life of the work.

The statewide frost-depth guide is 42 inches, but confirm local conditions for foundations, utilities and any work affected by frost. For a gravel project, remove unstable surface material as needed, install geotextile where the site calls for it, place aggregate in manageable lifts, and compact each lift before adding the next one.

Choosing the right material

For a driveway or gravel road, use D-1 Base Course. For a pad, use D-1 Base Course over a properly prepared subgrade, with Pit Run where bulk build-up is needed. For a drain, French drain or culvert outlet, use Drain Rock. For a patio bedding layer, use Screened Sand. For a lawn, spread Topsoil after the final grade is set.

Order materials for Sitka City and Borough

Use the product calculator to size D-1 Base Course, Drain Rock, Screened Sand or other material for the planned depth and area. Place the order online and choose a delivery date at checkout.

Sitka City and Borough, AK D-1 Base Course Delivery