3/4" Crushed Stone in Alaska
Breakup can leave an unsurfaced Alaska drive soft and rutted. 3/4" Crushed Stone provides angular support for compacted base and drainage work.
- Size: Approximately 3/4 inch
- Type: Angular crushed stone
From $410 for 1 ton, delivery included (larger loads cost significantly less per ton)
Free delivery included
Free delivery anywhere in Alaska
Pick a delivery date
Weekday delivery, earliest Nov 3
Get a Free Quote
Fill out the form and our sales team will get back to you within the hour.
Everything You Need to Know About 3/4" Crushed Stone
Size and Grading
- Size
- Approximately 3/4 inch
- Type
- Angular crushed stone
During breakup, soft ground can turn an unsurfaced drive into a problem before it reaches the finished surface. 3/4" Crushed Stone has irregular, angular pieces that engage when compacted, helping create support for cabin pads, shop areas, driveway work, and gravel roads on remote lots. Spaces between the pieces also give water a route through the stone instead of holding it at the surface.
Muskeg requires careful separation and drainage planning, especially where thawing ground stays wet. Use geotextile beneath the stone as part of the base preparation, then compact the material for a settled working layer. This approach is useful for sites in the Mat-Su Valley, along the Parks Highway, and elsewhere where deep frost and seasonal thaw can affect ground conditions. The stone can also serve in drainage work where a firm, open aggregate layer is needed.
Quickly Calculate How Much You Need
Material: 3/4" Crushed Stone
How to Measure
Measure the length and width of your project area in feet
Decide on depth in inches (2" for landscaping, 4" for driveways)
Enter the values above and we'll calculate the tonnage you need
Need help figuring out the right amount? We can help!
Call or text us at our contact form and we'll help you calculate the right quantity for your project.
Not sure how much you need? The Stone Calculator has depth guides, coverage charts and worked examples for this material.
Common Uses
Driveways and Road Bases
Use 3/4-inch crushed stone beneath driveways and roads to create a compacted supporting layer. It carries vehicle traffic and helps protect the finished surface from deterioration, especially through deep frost and freeze-thaw cycling.
Footings and Building Pads
For home footings or larger building pads, 3/4-inch crushed stone makes a stable layer beneath the work. It supports the load and allows water to pass through, which matters where deep frost and freeze-thaw cycling affect foundations.
Water Management
Water can pass through the spaces between the angular, consistently sized 3/4-inch pieces without the material losing its form. It suits French drains, utility trenches, and stormwater management systems.
Backfill for Retaining Walls
Place crushed stone behind retaining walls for drainage and support. At 3/4-inch, it provides stable backfill while leaving room for water to move behind block, timber, and stone retaining walls.
Why Choose 3/4" Crushed Stone
Interlocking Compaction
Compaction causes the angular, uneven 3/4-inch pieces to bind together into a stable layer. Under heavy loads, this helps resist shifting, rutting, and erosion.
Open Drainage
The uniform 3/4-inch size leaves evenly distributed spaces for water to pass through the stone. This helps limit puddles, ice formation, and water damage around nearby structures and foundations.
Many Uses
3/4-inch crushed stone can serve projects ranging from driveways to drainage systems. Both contractors and homeowners use this size for a range of site work.
Bulk Project Material
Bulk 3/4-inch crushed stone is an option for construction projects that need a stable aggregate layer. Installation and maintenance needs depend on the application and site conditions.
